eDPI Calculator

Yes — eDPI is the only accurate way to compare sensitivities across different players and setups. DPI alone is meaningless without the in-game multiplier: a player at 400 DPI with 2.0 sensitivity and a player at 800 DPI with 1.0 sensitivity have identical eDPI (800) and will move their crosshair exactly the same distance for the same mouse movement. When pros share their settings online, always check eDPI, not just DPI, to understand their true sensitivity.

Most professional FPS players (CS2, Valorant, Apex Legends) use an eDPI between 200 and 800. The most common range is 300–600 eDPI. Lower eDPI (200–400) requires larger arm movements and gives more precision for long-range aiming. Higher eDPI (600–1000) allows faster target acquisition but makes micro-adjustments harder. If you're just starting out, 400–600 eDPI is a solid starting point — then adjust based on your mousepad size and play style.

As long as the eDPI is the same, both approaches produce identical cursor movement. However, most pros prefer 400–800 DPI with a moderate in-game sensitivity. Why? At very high DPI (e.g., 3200+), mouse sensors can introduce smoothing or interpolation that degrades tracking accuracy. At very low DPI (e.g., 100), the sensor reads fewer physical movements, reducing precision. The 400–800 DPI range is where most optical sensors perform at their rated accuracy. Pair it with raw-input enabled in-game to bypass Windows pointer acceleration.

Set Windows pointer speed to 6/11 (the exact middle position) and uncheck "Enhance pointer precision" in Mouse Properties → Pointer Options. Position 6/11 applies a 1:1 mouse-to-cursor ratio with no Windows-level scaling. Any other position changes the effective sensitivity and makes your eDPI calculation inaccurate. Also enable raw input in your game client (CS2, Valorant, and most competitive titles have this option) so the game reads directly from the mouse driver rather than through Windows.

Some well-known pro player eDPI values: s1mple (CS2) uses 400 DPI × 3.09 sens = 1,236 eDPI — unusually high for a pro. TenZ (Valorant) uses 800 DPI × 0.408 sens = 326 eDPI. Shroud uses 450 DPI × 2.6 sens = 1,170 eDPI for casual play. Stewie2k uses 400 DPI × 2.2 = 880 eDPI. The median eDPI across all Valorant pros is around 280–350. Note that what works for a pro depends on their individual mechanics — copy eDPI as a starting point, not a goal.

The most reliable way is to use a physical ruler and our Mouse DPI Test: set a target distance (e.g., 20 cm), move your mouse exactly that distance on your mousepad, and record the measured DPI. Then multiply by your in-game sensitivity to get your real eDPI. Mouse software like Razer Synapse or Logitech G Hub can report incorrect DPI if the sensor has drifted or if the setting wasn't saved properly. Physical verification is the only way to confirm your true DPI.